"S350" Single Wire Lugs (350 kcmil-6 AWG) & FLEX wire (262 kcmil-4 AWG)

In stock
SKU
S350
One barrel tin plated aluminum metric wire lug for use with 350 kcmil-6 AWG wire. This single barrel lug can be used with aluminum or copper wire. Convenient 5/16" mounting hole for easy lug installation. NEMA mounting holes and spacing; this is not a NEMA tested part.
WIRE CONNECTORS AND SOLDERING LUGS (ZMVV): INSTALLATION
Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.
"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, andthe like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."
Ref. UL White Book ZMVV section

Lugs sold individually.

UL & CSA Approved for FLEX wire Class G-K sizes 4 AWG- 262 kcmil AWG

Made in the USA from domestic and imported parts.
 
           
$3.74
  • Buy 90 for $2.78 each and save 26%
  • Buy 300 for $2.08 each and save 44%